OBS Ford F Series Door Pin Kit Customizable

This pin and bushings are made from abrasive-resistant and strong stainless steels typically used in aerospace and heavy industry. Designed to outlast your vehicle while taking all the abuse you can throw at them. They eliminate door sag and will not wear out. These door pins are capable of handling custom doors that have heavy speakers or other equipment in them.  Lifetime warranty!

Our door pin kits are precision machined in our facility to guarantee they meet our standards of quality and performance. 100% manufactured in the United States.

The kits are easily installed like a standard over the counter kit. The only difference is ours use a quality cross tension pin instead of a cheap spring clip.

Standard Size Bushings: These are recommended when there is no apparent wear to the bushing hole. If all of your bushing holes are in good shape we recommend ordering the normal OBS Kit. 

.035" Oversized Bushings: These are ideal for holes that are slightly worn where the standard-size bushings would fit loosely into. 

.075" Oversized Bushings: These are needed when the bushing hole has been severely worn. In cases where the hole is egg or oval-shaped, we recommend using JB Weld to fill the space around the bushing. This helps create a rigid bond to the bushing from the hinge plate. 

We also recommend ordering the oversized bushing that is slightly larger than the worn holes in the hinge plate. This allows you to file, grind, or drill the holes so that the bushing can be tightly press fit into the hole. 

Not sure what size bushings you will need before starting your project?: Order a customizable kit with standard bushings and pick up our 1st Gen S10 / OBS Ford oversized bushing pack to make sure your bases are covered.

Oversized Bushings Drill Bit Recommendations:

+.032": 1/2" Drill Bit

+.072": 17/32" Drill Bit

Note: You may still need to open these holes up slightly with a round file or die grinder. Remove a small amount of material and test fit the bushing constantly. You will want the bushing to fit in tightly. 

Lastly, we recommend inspecting each one of your pins and bushings and ordering the corresponding size bushings. This product menu allows you to piece together just the components you need. This product menu is only selecting one pin at a time, this is done because its likely that all of your bushing holes are not worn all the same. You will need to add 4 pins to your cart for a full kit, or 2 for a half kit (one door). 

Fits:

1980 - 1983 F100
1980 - 1997 F150
1980 - 1997 F250
1980 - 1997 F350

Free shipping to the lower 48 states!